Materials
Solid Extrusions (Blocks, Rods)
Characteristics
- (1) Light weight
PA6/CF20% products have a specific gravity of 1.22, 1/6 of that of iron (specific gravity 7.8) - (2) Processability
Can be shaped using vacuum forming or pressing and cut using lasers - (3) Customized designs
Designs can be added using punching or laminating - (4) Recyclable
Can be easily crushed down to recycle
Uses/Processing Methods
Cutting materials
Specifications
PA6/CF20% Blocks
- T60 x W300 x L500 mm
- T30 x W300 x L1000 mm
PA6/CF20% Rods
- φ10 x L2000 mm
Fused Extrusions (Sheets)
Characteristics
- (1) Light weight
PA6/CF20% products have a specific gravity of 1.22, 1/6 of that of iron (specific gravity 7.8) - (2) Processability
Can be shaped using vacuum forming or pressing and cut using lasers - (3) Customized designs
Designs can be added using punching or laminating - (4) Recyclable
Can be easily crushed down to recycle
Processing Methods
- Vacuum forming
- Punching
- Sandwich molding
- Pressing, stamping
- Laminating
- 3D punching
- Design punching
- Laminate punching
Specifications
PA6/CF20% Sheets
- T0.25 mm x W500 mm x L50m per roll
- T0.3 mm x W500 mm x L50m per roll
- T0.5 mm x W1000 mm x L50m per roll
- T1.0 x W1000 x 1000 mm
- T1.5 x W1000 x 1000 mm
PPS/CF20% Sheets
- T0.8 x W250 x L1000 mm (under development)
Variously Shaped Extrusions (Pipes, Mandrels, Modified Cross Sections)
Characteristics
- (1) Light weight
PA6/CF20% products have a specific gravity of 1.22, 1/6 of that of iron (specific gravity 7.8). - (2) Strong
Same strength as aluminum. - (3) Heat resistant
Heat deflection temperature of more than 200°C Uses, Processing Methods
Uses, Processing Methods
Uses
- Reinforcement materials
- Cutting materials
Processing Methods
- Bending
Specifications
PA6/CF20% Mandrels
- φ11 x L2000 mm
PA6/CF20% Pipes
- φ10～28 x L2000 mm (T1～3)
- T10 x W17 x L2000 mm (T2)
PA6/CF20% Modified cross sections
- T2.5 mm x W15 mm x L10 m per roll (I-shaped)
PPS/CF20% Pipes
- φ10 x L2000 mm (T1)