Extrusion Molded Products

TPS® Anti-Electrostatic (AE) Material

  • Empty
  • Empty
  • Empty

Anti-Electrostatic and Heat Resistant

AE (anti-electrostatic) materials are a high-function material developed to meet the growing need for preventing electrostatic charge and dust adhesion. The TI-5000 series, PEEK®, PPS, POM and ABS are used as the base plastic for AE material, which are classified into three types depending on the surface resistance zone.

Types List

Grade List

  • * The surface resistance figures are based on the measurements for the resin starter materials according to the ASTM-D257 measuring method, but verify the antistatic effect using an operational suitability test when actually using the material.
  • * Refer to the Products Catalogue on pages 45 for product specifications.

Properties Data

Category Property Unit Testing Method ASTM TI530-AE3 PEEK
430-AE3
PPS
230-AE3
Mechanical properties Tensile strength MPa D638 100 98 98
Tensile elasticity % 3.5 4.0 5.4
Bending strength MPa D790 137 160 150
Bending elasticity GPa 10.8 4.2 6.2
Poisson’s ratio - - - - -
Compressive strength MPa D695 - - -
Izod impact strength (notched) J/m D256 37 39 45
Rockwell hardness - D785 M95 M100 M98
Physical properties Specific gravity (23°C) - D792 1.55 1.33 1.40
Water absorption (23°C, 24 Hrs) % D570 - - 0.02
Linear expansion coefficient ×10-5
/°C
JIS K7197 1.3 3.5 -
Thermal conduction W/mK E 1530 - - -
Flammability (UL) - D570 V-0
(0.75mm)
V-0 equivalent V-0 equivalent
Thermal properties Deflection temperature under load (1.82 MPa) °C D648 280 164 173
Continuous use temperature °C - 250 260 220
Glass transition temperature °C - 280 143 88
Melting point °C - - 343 278
Electrical properties Dielectric strength MV/m D149 - - -
Surface resistance Ω D257 101~6 101~6 101~6
Volume resistance Ω・cm 101~6 101~6 -
Permittivity 106Hz - D150 - - -
Dielectric tangent 106Hz - - - -
Certified per the Food Sanitation Act - - -
  • * The values given above for the properties are representative values given by the manufacturers of the raw materials, and are not guaranteed values for the product.
  • * The cells with no values given (-) indicate that useful data is not available or cannot be obtained at this time.
  • * AE stands for anti-electrostatic, and is an abbreviation for our anti-electrostatic grade material.

Search by property